PA 12


PA 12
Das PA 12-Material von HP besteht aus einer sehr feinen Partikelgröße und ermöglicht die Herstellung von Elemente mit höherer Dichte und geringerer Porosität.

Diese Besonderheit macht es ideal für Kleinserien, wenn eine gute Oberflächenqualität in Verbindung mit dünnen Wänden erforderlich ist. Das Pulver ist auch selbsttragend und benötigt daher beim Drucken keine Unterstützungsstrukturen.

General properties Test Method Value
Powder melting point (DSC) ASTM D3418 187° C
Particle size ASTM 03451 60 µm
Bulk density of powder ASTM D1895 0,425 g/cm3
Density of parts ASTM D792 1,01 g/cm3
Mechanical Properties Test Method Value
Tensile Strength (Max Load XY) ASTM D638 48 MPa
Tensile Strength (Max Load Z) ASTM D638 48 MPa
Tensile Modulus (XY) ASTM D638 1700 Mpa
Tensile Modulus (Z) ASTM D638 1800 Mpa
Elongation at Break (XY) ASTM D638 20%
Elongation at Break (Z) ASTM D638 15%
Thermal Properties Test Method Value
Heat Deflection Temperature (@ 0.45 MPa) ASTM D648 175° C
Heat Deflection Temperature (@ 1.82 MPa) ASTM D648 95° C

The information presented are typical values intended for reference and comparison purposes only. They should not be used for design specifications or quality control purposes.
End-use material performance can be impacted (+/-) by, but not limited to, part design, end-use conditions, etc. Actual values will vary with build conditions.
Product specifications are subject to change without notice.
The performance characteristics of these materials may vary according to application, operating conditions, or end use. Each user is responsible for determining that the material is safe, lawful and technical
suitable for the intended laws and regulations. Zare makes no warranties of any kind, express or implied, including, but not limited to, the warranties of merchantability, fitness for a particular use, or warranty against patent infringement. All Trademarks included in this document are property of the respective owner.