Accura® Xtreme

The Accura® Xtreme is a material that is suitable for a very elastic prototype;it mixes a structural essence with flexibility. This material is suitable for functional prototypes and mechanical tests.

  • Great longevity and impact resistance;
  • equivalent in aspect and finish to the definitive piece;
  • perfect for electronic devices.

The Accura® Xtreme withstands deformations and high temperatures. It has printed polypropylene's (PP) and ABS' aesthetical features.

Post-Cured Material Condition Metric U.S.
Tensile Strength (MPa/PSI) ASTM D638 38-44 5510-6380
Tensile Modulus (MPa/KSI) ASTM D638 1790-1980 260-287
Elongation at Break (%) ASTM D638 14-22 % 14-22 %
Flexural Strength (MPa/PSI) ASTM D790 57-71 7540-10300
Flexural Modulus (MPa/KSI) ASTM D790 1520-2070 220-300
Impact Strength (J/m /Ft-lbs/in) ASTM D256 35-52 0.66-0.98
Heat Deflection Temperature ASTM D648
@66 PSI
@264 PSI
62 °C
54 °C
Glass Transition (Tg)   70-74 °C 158-165 °F
Liquid Material Condition Value Available Colors
Viscosity @30°C (86°F) 250-300 cps
Penetration Depth (Dp)   4.1 mils
Critical Exposure (Ec)   11.7 mJ/cm2
Solid Density @25°C (77°F) 1.19 g/cm3
Liquid Density @28°C (82°F) 1.13 g/cm3
Tested Build Styles   EXACT™

Warranty/Disclaimer: The performance characteristics of these products may vary according to product application, operating conditions, or with end use. 3D Systems makes no warranties of any type, express or implied, including, but not limited to, the warranties of merchantability or tness for a particular use.

© 2015 by 3D Systems, Inc. All rights reserved. Specifications subject to change without notice. The 3D logo and Accura are registered trademarks of 3D Systems, Inc.