AlluSinter (PA+Aluminium)


 AlluSinter (PA+Aluminium)

Is a structural material made of Nylon filled with aluminum; excellent for applications which require good mechanical and thermal characteristics. The reduced grain size allows an excellent detail. AlluSinter results an ideal material for both structural and aesthetic applications. Because of its excellent workability Allusinther is particularly suitable for post-process treatment like painting, vacuum metallization, etc.

Mechanical Properties Test Method English Metric
Tensile Strength X direction ISO 527-1/-2 - - - - - 48 MPa
Tensile Strength Y direction ISO 527-1/-2 - - - - - 48 MPa
Tensile Modulus X direction ISO 527-1/-2 - - - - - 3,800 MPa
Tensile Modulus Y direction ISO 527-1/-2 - - - - - 3,800 MPa
Strain at Break X direction ISO 527-1/-2 - - - - - 4%
Charpy Impact Strength (+23°C X Direction) ISO 179/1eU - - - - - 29 KJ/m2
Charpy Notched Impact Strength (+23°C X Direction) ISO 179/1eA - - - - - 4.6 KJ/m2
Flexural Modulus (23°C, X Direction) ISO 178 - - - - - 3,600 MPa
Flexural Strength (X Direction) ISO 178 - - - - - 72 MPa
Volume resistivity (X Direction) IEC 60093 - - - - - 3E12 Ohm*m
Thermal Properties Test Method English Metric
Temp. of Deflection under load (1.80 MPa, X Direction) ISO 75-1/-2 - - - - - 144°C
Temp. of Deflection under load (0.45 MPa, X Direction) ISO 75-1/-2 - - - - - 175°C
Vicat Softening Temperature (50°C/h 50N) ISO306 - - - - - 169°C
Melting Temperature (20°C/min) ISO 11357-1/-3 - - - - - 176°C
Other Test Method Value Available Colors
Density - - - - - 1.360 Kg/m3
Light Gray
Relative Permittivity (100Hz) IEC 60250 13
Relative Permittivity (1MHz) IEC 60250 10
Dissipation Factor (1MHz) IEC 60250 180 E-4
Surface Resistivity IEC 60093 5E14 ohm
Electric Strength IEC 60243-1 0.1 kV/mm
Shore D Hardness (15s) ISO 868 76