RGD 525 High Temperature


RGD 525 High Temperature

RGD 525 High Temperature material combines heat resistance with exceptional dimensional stability. The material can simulate the thermal performance of engineering plastics and is ideal for testing applications such as hot-air flow or hot-water flow in pipes and faucets. Objet High Temperature material has a heat deflection temperature of 63–67 °C (145-153 °F) upon removal from the printer. Thermal post treatment in a programmable oven can increase this to 75-80 °C (167-176 °F).

Mechanical Properties Test Method English Metric
Tensile Strength ASTM D638-03 10,000-11,500 psi 70-80 MPa
Tensile Modulus ASTM D638-04 465,000-510,000 psi 3,200-3,500 MPa
Tensile Elongation ASTM D638-05 10-15% 10-15%
Flexural Strength ASTM D790-03 16,000-19,000 psi 110-130 MPa
Flexural Modulus ASTM D790-04 450,000-510,000 psi 3,100-3,500 MPa
IZOD Impact, notched ASTM D256-06 0.262-0.300 ft-lb/in 14-16 J/m
Thermal Properties Test Method English Metric
HDT @ 0.45 MPa ASTM D648-06 145-163°F 63-67°C
HDT @ 0.45 MPa after thermal post treatment A ASTM D648-06 167-176°F 75-80°C
HDT @ 1.82 MPa ASTM D648-07 131-135°F 55-57°C
Glass Transition Temp. (Tg) DMA E» 144-149°F 62-65°C
Other Test Method Value Available Colors
Shore Hardness (D) Scale D 87-88
Ivory
Rockwell Hardness Scale M 78-83
Polymerized density ATSM D792 0.97-0.98 g/cm3
Ash content USP281 0.38-0.42 %
Water absorption, % D570-98 24hr 1.2-1.4 %

The information presented are typical values intended for reference and comparison purposes only. They should not be used for design specifications or quality control purposes.
End-use material performance can be impacted (+/-) by, but not limited to, part design, end-use conditions, etc. Actual values will vary with build conditions.
Product specifications are subject to change without notice.
The performance characteristics of these materials may vary according to application, operating conditions, or end use. Each user is responsible for determining that the material is safe, lawful and technical suitable for the intended laws and regulations. Zare makes no warranties of any kind, express or implied, including, but not limited to, the warranties of merchantability, fitness for a particular use, or warranty against patent infringement.
All information contained in this document were supplied by Stratasys Inc. Copyright© 2013
All Trademarks included in this document are property of the respective owner