Thermoplastic elastomer material with rubber-like flexibility and functionality. Durable with good tear resistance, surface finish and feature detail.
Shore A hardness can be varied without changing material Applications: consumer goods, exible parts for industrial prints, functional prototypes and footwear, hoses and seals.
|Mechanical Properties||Test Method||Metric|
|Tensile Strength, Ultimate||D412||2.1 MPa|
|Tensile Strength, Break||D638||2.0 MPa|
|Tensile Modulus||D638||5.3 MPa|
|Elongation at Yield||D638||220%|
|Elongation at Break||D412||200%|
|Flexural Modulus||D790||6.0 MPa|
|Hardness, Shore A||D2240||59.0|
|Initial Tear Resistance (Die C @ 23 °C)||D624||15.4 J/m|
|Abrasion Resistance Taber, CS-17 Wheel, 1 Kg Load D4060||D4060||97.9 mg/ 1000 cycles|
|General Properties||Test Method||Metric|
|Sintered Part Density||-||0.78 g/cm3|
Warranty/Disclaimer: The performance characteristics of these products may vary according to product application, operating conditions, or with end use. 3D Systems makes no warranties of any type, express or implied, including, but not limited to, the warranties of merchantability or tness for a particular use.
© 2016 by 3D Systems, Inc. All rights reserved. Speci cations subject to change without notice. 3D Systems and DuraForm are registered trademarks and the 3D Systems logo is a trademark of 3D Systems, Inc