ABS-ESD7

[ DOWNLOAD PDF ] [ Altri Materiali ]
ABS-ESD7

L’ ABS-ESD7 (acrylonitrile butadiene styrene-electrostatic dissipative) è un materiale termoplastico ABS con proprietà dissipative statiche per applicazioni in cui una carica statica può danneggiare i prodotti, compromettere le loro prestazioni o causare un'esplosione.
L’ ABS-ESD7 impedisce l’accumulo di elettricità statica evitando, quindi, shock statici e la possibilità da parte di materiali come polveri e particelle di aderire.
L’ABS-ESD7 è ideale per prodotti elettronici/di elettronica con circuiti stampati, per l'industria dei trasporti e per le aziende che si occupano di attrezzature industriali.
Largamente usato nella creazione di maschere per l’assemblaggio di componenti elettronici è impiegato, anche, per la costruzione di prototipi funzionali per il deposito di carburante e del materiale per la spedizione come custodie e imballi.

[ QUOTA IL TUO MODELLO! ]
Mechanical Properties1 Test Method English Metric
Tensile Strength (Type 1, 0.125”, 0.2”/min) ASTM D638 5,200 psi 36 MPa
Tensile Modulus (Type 1, 0.125”, 0.2”/min) ASTM D638 350,000 psi 2,400 MPa
Tensile Elongation (Type 1, 0.125”, 0.2”/min) ASTM D638 3% 3%
Flexural Strength (Method 1, 0.05”/min) ASTM D790 8,800 psi 61 MPa
Flexural Modulus (Method 1, 0.05”/min) ASTM D790 350,000 psi 2,400 MPa
IZOD Impact, notched (Method A, 23°C) ASTM D256 2.1 ft-lb/in 111 J/m
IZOD Impact, un-notched (Method A, 23°C) ASTM D256 1.1 ft-lb/in 55 J/m
Thermal Properties3 Test Method English Metric
Heat Deflection (HDT) @ 66 psi, 0.125" unannealed ASTM D648 204°F 96°C
Heat Deflection (HDT) @ 264 psi, 0.125" unannealed ASTM D648 180°F 82°C
Vicat Softening Temp. (Rate B/50) ASTM D1525 210°F 99°C
Coefficient of Thermal Expansion (flow) ASTM E831 4.95 in/in/°F 8.825 mm/mm/°C
Coefficient of Thermal Expansion (xflow) ASTM E831 4.75 in/in/°F 8.465 mm/mm/°C
Glass Transition (Tg) DSC (SSYS) 226°F 108°C
Melt Point - - - - - - - - - Not Applicable2 Not Applicable2
Other3 Test Method Value Available Colors
Specific Gravity ASTM D792 1.04
Black
  
Flame Classification UL94 HB (0.06", 1.5 mm)
Rockwell Hardness ASTM D785 109.5
Volume Resistivity5 ASTM D257 4.0x1010 - 3.0x109 ohms
Surface Resistance5 ASTM D257 109 - 106 ohms

1 Build orientation is on side long edge
2 Due to amorphous nature, material does not display a melting point
3 Literature value unless otherwise noted
4 Test results based on Stress Crack Resistance (24-hour immersion @ 23°C and @ 100°C)
5 All electrical property values were generated from the average of test plaques built with default part density (solid). Test plaques were 4.0 x 4.0 x 0.1 inches (102 x 102 x 2.5 mm) and were built both in the flat and vertical orientation. The range of values is mostly the result of the difference in properties of test plaques built in the flat vs. vertical orientation.

The information presented are typical values intended for reference and comparison purposes only. They should not be used for design specifications or quality control purposes.
End-use material performance can be impacted (+/-) by, but not limited to, part design, end-use conditions, etc. Actual values will vary with build conditions.
Product specifications are subject to change without notice.
The performance characteristics of these materials may vary according to application, operating conditions, or end use. Each user is responsible for determining that the material is safe, lawful and technical suitable for the intended laws and regulations. Zare makes no warranties of any kind, express or implied, including, but not limited to, the warranties of merchantability, fitness for a particular use, or warranty against patent infringement.
All information contained in this document were supplied by Stratasys Inc. Copyright© 2013
All Trademarks included in this document are property of the respective owner