L'Accura® ClearVue™ è una resina trasparente con proprietà simili al PMMA ed un' ottima trasparenza. Produce componenti incolori, funzionali e precisi che simulano l’ aspetto dell’ acrilico. Accura® ClearVue™ è ideale per le applicazioni che richiedono trasparenze come le lenti nell’automotive, le bottiglie, parti per l’analisi del flusso dei fluidi, prototipi di packaging, tubi leggeri e simili.
| Post-Cured Material | Condition | Metric | U.S. |
| Tensile Strength (MPa/PSI) | ASTM D638 | 41-46 | 5950-6670 |
| Tensile Modulus (MPa/KSI) | ASTM D638 | 2030-2220 | 294-322 |
| Elongation at Break (%) | ASTM D638 | 4 - 7% | 4- 6% |
| Flexural Strength (MPa/PSI) | ASTM D790 | 53-67 | 7690-9720 |
| Flexural Modulus (MPa/KSI) | ASTM D790 | 1560-2040 | 226-296 |
| Impact Strength (J/m /Ft-lbs/in) | ASTM D256 | 43-67 | 0.81-1.26 |
| Heat Deflection Temperature |
ASTM D648 @66 PSI @264 PSI |
46 °C 41 °C |
115°F 106°F |
| Coefficient of Thermal Expansion (CTE) |
ASTM E831-93 < 35°C > 60°C |
70 160 |
70 160 |
| Glass Transition (Tg) | DMA, E” | 56°C | 113°F |
| Shore D | 84 | 84 |
| Liquid Material | Condition | Value | Available Colors | |
| Viscosity | @30°C (86°F) | 235-260 cps |
|
|
| Penetration Depth (Dp) | 6.1 mils | |||
| Critical Exposure (Ec) | 9.5 mJ/cm2 | |||
| Solid Density | @25°C (77°F) | 1.17 g/cm3 | ||
| Liquid Density | @28°C (82°F) | 1.10 g/cm3 |
Warranty/Disclaimer: The performance characteristics of these products may vary according to product application, operating conditions, or with end use. 3D Systems makes no warranties of any type, express or implied, including, but not limited to, the warranties of merchantability or tness for a particular use.
© 2015 by 3D Systems, Inc. All rights reserved. Specifications subject to change without notice. The 3D logo and Accura are registered trademarks of 3D Systems, Inc.